IEC60068-2-75 Impact Testing Machine Nylon Base 1000*1000mm Thickness 8mm

IEC60068-2-75 Impact Testing Machine Nylon Base 1000*1000mm Thickness 8mm​

Introduction:

This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. It is for testing enclosure mechanical strength of household and similar electrical appliances, lamps. The device is released by the electromagnet, which can ensure the instantaneous release and the vertical drop. The lifting device is combined by screw guide rail, which can make the lower end of the conduit smooth contact with the surface of the specimen, the fixed drop height is the length of the guide rail, just contact no need to adjust, easy to use. Standard equipped with 2, 5, 10, 20, 50 J hammer and conduit, it is suitable for the enclosure mechanical strength test of most products.

Notice:

1. The power should be cut off after the test is completed, to prevent overheating of the electromagnet.

2. The sample should be installed before the hammer is drop, impact is not allowed without installing the sample, avoid damaging the hammer.

3. Please pay attention to being dampproof and dustproof and maintenance.

Standard: IEC 60068-2-75 Test Ehc: vertical hammer, UL498 clause SD7.2

Application: This device is intended to test the mechanical strength test of the shell of the electric appliance for house hold and similar purpose, as well as test drop impact resistance of the lamp. Impact Testing Machine

Test sample: Electric appliance, plug and socket, luminaries for house hold and similar purpose

Feature: Comply with the requirement of standard IEC60068-2-75. Cantilever type rack, release the impact element by electromagnet, impact height determined by guide tube. Impact Testing Machine

Parameters:

IEC60068-2-75 Impact Testing Machine

Nylon Base Impact Testing Machine

Thickness 8mm Impact Testing Machine

IEC60068-2-75 Impact Testing Machine Nylon Base 1000*1000mm Thickness 8mm Images